- Code commande RS:
- 298-3941
- Marque:
- RS PRO
6 Sous 2 jour(s) (stock Europe)
38 Sous 2 jour(s) (stock Europe)
Uniquement disponible en livraison standard
Ajouté
Prix pour la pièce
56,89 €
HT
68,27 €
TTC
Unité | Prix par unité |
1 + | 56,89 € |
- Code commande RS:
- 298-3941
- Marque:
- RS PRO
Documentation technique
Législation et Conformité
- Pays d'origine :
- GB
Détail produit
Modules de mise à la terre
RS PRO earth bonding boxes with 3 x 10 mm studs which are ideal for any workplaces where sensitive electronic equipment must be protected from static electricity.
Options available include:
298-3957 – Earth bonding box, 3x10mm stud
298-3941 – Earth bonding box, 2x4mm sockets,1x10mm stud
298-3935 - Earth bonding box, 3 x 4mm sockets
These EBP boxes meet the need defined in EN 61340-5 for connecting the elements of an ESD Protected Area (EPA) to a common connection point or Earth Bonding Point (EBP).
The normal earth contact is linked via an individual 1 meg-ohm current limiting resistor. In the event of a workstation element inadvertent contact with the mains supply voltage, the resistor will limit the fault current to less than 0.3 mA at 240 V.
RS PRO have a great range of ESD grounding accessories including bonding plugs, bonding boxes, bonding brackets and cords plus many more to help eliminate the build-up of static discharge which can be a risk to static sensitive components or devices.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Options available include:
298-3957 – Earth bonding box, 3x10mm stud
298-3941 – Earth bonding box, 2x4mm sockets,1x10mm stud
298-3935 - Earth bonding box, 3 x 4mm sockets
These EBP boxes meet the need defined in EN 61340-5 for connecting the elements of an ESD Protected Area (EPA) to a common connection point or Earth Bonding Point (EBP).
The normal earth contact is linked via an individual 1 meg-ohm current limiting resistor. In the event of a workstation element inadvertent contact with the mains supply voltage, the resistor will limit the fault current to less than 0.3 mA at 240 V.
RS PRO have a great range of ESD grounding accessories including bonding plugs, bonding boxes, bonding brackets and cords plus many more to help eliminate the build-up of static discharge which can be a risk to static sensitive components or devices.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Features and Benefits:
Conçu pour la fixation sous un plan de travail.
Ce module permet la mise à la terre de 3 opérateurs simultanément.
Fourni complet avec un câble de 2 m pour raccordement à la terre.
Moulé en ABS avec coins arrondis.
Ce module permet la mise à la terre de 3 opérateurs simultanément.
Fourni complet avec un câble de 2 m pour raccordement à la terre.
Moulé en ABS avec coins arrondis.
Typical Applications
ESD grounding accessories form part of a workplace safety system to monitor and/or eliminate the build-up or discharge of static electricity that may pose a risk to electrical components such as computer hard drives.
FAQs
What are ESD grounding accessories used for?
ESD (electrostatic discharge) grounding accessories are components within ESD grounding loops. These accessories are used in workplaces where sensitive electronic equipment must be protected from static electricity, or where there's a danger of flammable liquids or gases igniting.
ESD protection is achieved by electrical grounding. Grounding accessories are components that may be required as part of an entire ESD grounding system. They're often used to connect and integrate ESD-safe mats, ESD continuous monitors, wrist straps, ESD safe shoe covers and other apparel, or ESD-safe surfaces.
What types of ESD grounding accessories are available?
Available accessories include a range of connectors, bonding points, bonding plugs, bonding boxes, bonding brackets, earthing wires, individual replacement snap studs, stud installation tools, earth stud kits, crocodile clips and a variety of adaptors such as stud-to-banana sockets.
ESD (electrostatic discharge) grounding accessories are components within ESD grounding loops. These accessories are used in workplaces where sensitive electronic equipment must be protected from static electricity, or where there's a danger of flammable liquids or gases igniting.
ESD protection is achieved by electrical grounding. Grounding accessories are components that may be required as part of an entire ESD grounding system. They're often used to connect and integrate ESD-safe mats, ESD continuous monitors, wrist straps, ESD safe shoe covers and other apparel, or ESD-safe surfaces.
What types of ESD grounding accessories are available?
Available accessories include a range of connectors, bonding points, bonding plugs, bonding boxes, bonding brackets, earthing wires, individual replacement snap studs, stud installation tools, earth stud kits, crocodile clips and a variety of adaptors such as stud-to-banana sockets.
Normes
Conforme au programme de contrôle ESD S20.20 et à la norme EN 61340-5-1
Caractéristiques techniques
Attribut | Valeur |
---|---|
Type d'accessoires | Boîtier de mise à la terre |
Type de connecteur | 4 pressions femelle 10mm, 2 douilles 4mm |
Type de terminaison | Cosses nues roulées à œillet (cosse à œillet) |
Conforme à la norme EN 61340-5-1 | Oui |
Résistance | 1mΩ |
Style de cordon | Droit |
Nos clients ont également consulté
- Tresse de mise à la terre RS PRO, Pression femelle 10mm
- Cordon de mise à la terre SCS, Pression femelle 10mm
- Boîtier de mise à la terre RS PRO, 2 pressions femelle 10mm
- Tresse de mise à la terre RS PRO Pression femelle10mm
- Support de mise à la terre RS PRO 2 pressions femelle 4mm
- Fiche de mise à la terre RS PRO 2 douilles banane, UK
- Bracelet de mise à la terre PSDE et jeu de cordons RS PRO pression...
- Cordon de mise à la terre, Pression femelle 10mm