- Code commande RS:
- 348-7977
- Référence fabricant:
- FCTE45
- Marque:
- Sensata / Cynergy3
2 En stock pour livraison sous 2 jour(s)
Uniquement disponible en livraison standard
Ajouté
Prix pour la pièce
53,09 €
HT
63,71 €
TTC
Unité | Prix par unité |
1 - 4 | 53,09 € |
5 - 9 | 51,43 € |
10 + | 49,84 € |
- Code commande RS:
- 348-7977
- Référence fabricant:
- FCTE45
- Marque:
- Sensata / Cynergy3
Documentation technique
Législation et Conformité
- Pays d'origine :
- IT
Détail produit
Pump Protection Switch
Fits to pump body or pipe work (pipe diameter 20 to 200mm)
A rapid rise past the set-point temperature of 45°C (if the inlet water level falls below the centre line of the inlet) of any centrifugal type pump, will cause this device to react.
High power switch cuts off the electrical supply to protect the pump from dry running, seal overheating and other damage
Switch rating: 16A/250V ac
Manual reset restarts the pump
Condition indicator light
Dimensions; H46mm, W46mm, L72mm
A rapid rise past the set-point temperature of 45°C (if the inlet water level falls below the centre line of the inlet) of any centrifugal type pump, will cause this device to react.
High power switch cuts off the electrical supply to protect the pump from dry running, seal overheating and other damage
Switch rating: 16A/250V ac
Manual reset restarts the pump
Condition indicator light
Dimensions; H46mm, W46mm, L72mm
Caractéristiques techniques
Attribut | Valeur |
---|---|
Tension d'alimentation | 250 V c.a. |
Indice de protection IP | IP21 |
Température du fluide maximum | +45°C |
- Code commande RS:
- 348-7977
- Référence fabricant:
- FCTE45
- Marque:
- Sensata / Cynergy3
Nos clients ont également consulté
- Contrôleurs de pompes
- Commande de pompe process pour pompe Diaphragme 240 V, IP65
- Commande de pompe process pour pompe Hydromatic IP65
- Commande de pompe process pour pompe Micropompe brushless IP20
- Vanne de process à commande pneumatique SMC, NO
- Commande de pompe process pour pompe Pompe liquide standard IP55
- Commande de pompe process IP20, IP40
- Filtre pour pompe process RS PRO 64.8L/min.