Carte d'évaluation Infineon PSoC 64 Secure Boot Prototyping Kit 150MHz

The Infineon PSoC 64 “Secure Boot” Prototyping Kit carries a PSoC 64 device. In addition, the board features an on-board programmer/debugger (KitProg3), a 512-Mbit Semper™ NOR flash, a micro-B connector for USB device interface, two user LEDs and one user push button. The board supports operating voltages of 1.8V, 2.5V and 3.3V

512-Mbit external Quad SPI Semper NOR Flash that provides a fast, expandable memory for data and code
KitProg3 on-board SWD programmer/debugger, USB-UART and USB-I2C bridge functionality via a micro-B connector
A second micro-B connector for USB device interface
Two user LEDs, a user button, and a reset button
One Mode button, one status LED and one power LED for KitProg3