Oscilloscope, 70 MHz Rohde & Schwarz série RTB2000 Support d'établi 2 canaux

Code commande RS:: 143-9311
Numéro d'article Distrelec:: 300-82-455
Référence fabricant:: RTB2K-72
Marque:: Rohde & Schwarz

Oscilloscope, 70 MHz Rohde & Schwarz série RTB2000 Support d'établi 2 canaux

Actuellement indisponible

Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.

Proposition de remplacement

Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:

Oscilloscope série RTB2, 70 MHz Rohde & Schwarz Numérique 18 canaux

Code commande RS: 278-276

la pièce

1 690,00 €

2 028,00 €

TTC

Code commande RS:: 143-9311
Numéro d'article Distrelec:: 300-82-455
Référence fabricant:: RTB2K-72
Marque:: Rohde & Schwarz

Caractéristiques techniques

Documentation technique

Législation et Conformité

Détail produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Rohde & Schwarz
	Type de produit	Oscilloscope
	Largeur de bande	70 MHz
	Série	RTB2000
	Type d'oscilloscope	Support d'établi
	Nombre de canaux	2
	Distrelec Product Id	30082455
	Hauteur	220 mm
	Type d'interface	CAN, IIC, LIN, RS-232, RS422, RS-485, SPI, UART, USB
	Longueur	390 mm
	Base de temps maximum	500 s/div
	Sensibilité verticale maximum	5 V/div
	Base de temps minimum	1 ns/div
	Sensibilité verticale minimum	1 mV/div
	Numéro de modèle	RTB2K-72
	Source d'alimentation	Secteur
	Temps de montée	5 ns
	Normes/homologations	No
	Résolution verticale	10 bit, 16 (High Resolution Decimation Mode) bit
	Largeur	152 mm

	Sélectionner tout
	Marque Rohde & Schwarz
	Type de produit Oscilloscope
	Largeur de bande 70 MHz
	Série RTB2000
	Type d'oscilloscope Support d'établi
	Nombre de canaux 2
	Distrelec Product Id 30082455
	Hauteur 220 mm
	Type d'interface CAN, IIC, LIN, RS-232, RS422, RS-485, SPI, UART, USB
	Longueur 390 mm
	Base de temps maximum 500 s/div
	Sensibilité verticale maximum 5 V/div
	Base de temps minimum 1 ns/div
	Sensibilité verticale minimum 1 mV/div
	Numéro de modèle RTB2K-72
	Source d'alimentation Secteur
	Temps de montée 5 ns
	Normes/homologations No
	Résolution verticale 10 bit, 16 (High Resolution Decimation Mode) bit
	Largeur 152 mm

Pays d'origine :: RO

Rohde & Schwarz RTB2000 Digital Oscilloscopes

The Rhode & Schwarz RTB2000 series digital oscilloscopes offer the Power of ten: 10-bit ADC, 10 Msample memory and 10.1 inch colour touchscreen. These features ombined with smart operating concepts make the R&S®RTB2000 series the perfect tools for university laboratories, for troubleshooting embedded designs during development and for production and service departments.;This series of oscilloscopes offer the largest (10.1 inch) capacitive touch display with the highest resolution of 1280 x 800 pixel in its class. The touch screen allows quick navigation in pop-up menus, easily adjust scaling, zoom in or to move a waveform and even annotate the display and take screenshots. It works just like your smartphone touch screen.;The R&S®RTB2000 series give users more than just an oscilloscope. It also includes a logic analyser, protocol analyser, waveform and pattern generator and digital voltmeter. Dedicated operating modes for frequency analysis, mask tests and long data acquisitions are also integrated. Debugging all kinds of electronic systems is easy and efficient.

Features

10 bit vertical resolution

1 mV/div: full measurement bandwidth and low noise

10Msample standard and 20 Msample interleaved

Segmented memory: 160 Msample with history

10.1 inch high resolution capacitive touch screen with gesture support

On-screen annotation function by using your finger with screen-shot capture

Fast access to important tools

Education mode disables automatic functions for more manual control

Multilingual support;Mixed signal operation option (model dependant, also any oscilloacope can be upgraded to MSO with the RTB-B1 MSO option (RS 143-9334)

Oscilloscope Choice:

143-9311 RTB2002, 70 MHz, 2ch;143-9312 RTB2002, 70MHz, 2ch, MSO;143-9313 RTB2004, 70 MHz, 4ch;143-9315 RTB2004, 70 MHz, 4ch, MSO;143-9316 RTB2002, 100 MHz, 2ch;143-9317 RTB2004, 100 MHz, 2ch, MSO;143-9318 RTB2004, 100 MHz, 4ch;143-9319 RTB2004,100 MHz,4ch, MSO;143-9321 RTB2002, 200 MHz, 2ch;143-9322 RTB2002, 200 MHz, 2ch, MSO;143-9323 RTB2004, 200 MHz, 4ch;143-9324 RTB2004, 200 MHz, 4ch, MSO;143-9325 RTB2002, 300 MHz, 2ch;143-9326 RTB2002, 300 MHz, 2ch, MSO;143-9327 RTB2004, 300 MHz, 4ch;143-9328 RTB2004, 300 MHz, 4ch, MSO

Growth Potential

The Rohde & Schwarz RTB2000 oscilloscopes can be adapted by the installation of software updates. These updates apply to triggering and decoding of serial protocols and the history and segmented memory mode. The waveform and pattern generator and the MSO capabilities (model dependent, see below) are built-in and just need to be activated. The bandwidth can be upgraded up to 300MHz making functional retrofitting very easy.

Bandwidth Upgrades:

143-9336 RTB-B221 Upgrade 100 MHz for RTB2002

143-9337 RTB-B222 Upgrade 200 MHz for RTB2002

143-9338 RTB-B223 Upgrade 300 MHz for RTB2002

143-9339 RTB-B241 Upgrade 100 MHz for RTB2004

143-9340 RTB-B242 Upgrade 200 MHz for RTB2004

143-9341 RTB-B243 Upgrade 300 MHz for RTB2004

Trigger and Decode

143-9329 RTB-K1 I2C/SPI Trigger & Decode

143-9330 RTB-K2 UART/RS232 Trigger & Decode

143-9331 RTB-K3 CAN/LIN Trigger & Decode

History and Segmented Memory

143-9332 RTB-K15 History & Segmented Memory

Software Option Bundle

143-9333 RTB-PK1 Software Option Bundle

Mixed Signal Option

143-9334 RTB-B1 Mixed Signal Option

Function Generator

143-9335 RTB-B6 Function Generator

Front Cover and Carry Case

143-9342 RTB-Z1 Front Cover;143-9343 RTB-Z3 Carrying Case