Scanner laser, série S3000 SICK, Scanner laser, 49 m No, T3
- Code commande RS:
- 271-568
- Référence fabricant:
- S30A-4011CA
- Marque:
- SICK
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
Proposition de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
4 607,40 €
HT
5 528,88 €
TTC
- Code commande RS:
- 271-568
- Référence fabricant:
- S30A-4011CA
- Marque:
- SICK
Caractéristiques techniques
Documentation technique
Législation et Conformité
Détail produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SICK | |
| Type de produit | Scanner laser | |
| Série | S3000 | |
| Type de composant | Scanner laser | |
| Distance de balayage maximale | 49 m | |
| Normes/homologations | No | |
| Type de sécurité | 3 | |
| Certification ATEX | Non | |
| Hauteur | 185 mm | |
| Longueur | 160 mm | |
| Temps de réponse maximum | 60 ms | |
| Distance minimale de balayage | 10 m | |
| Longueur d'onde maximale | 905 nm | |
| Type de terminaison | Vis | |
| Largeur | 155 mm | |
| Sélectionner tout | ||
|---|---|---|
Marque SICK | ||
Type de produit Scanner laser | ||
Série S3000 | ||
Type de composant Scanner laser | ||
Distance de balayage maximale 49 m | ||
Normes/homologations No | ||
Type de sécurité 3 | ||
Certification ATEX Non | ||
Hauteur 185 mm | ||
Longueur 160 mm | ||
Temps de réponse maximum 60 ms | ||
Distance minimale de balayage 10 m | ||
Longueur d'onde maximale 905 nm | ||
Type de terminaison Vis | ||
Largeur 155 mm | ||
Statut RoHS : Exempté
- Pays d'origine :
- DE
Sick S3000 - Advanced Safety Laser Scanner
SICK S300 Laser Scanner is a professional device that can be used for a wide range of applications such as protection of machines, operators and systems. A complete system guarantees safe and efficient operation and can mount both horizontally and vertically to protect hazardous areas, points and access points. SICK S3000 features a unique four zone protection system. All four protection zones and four warning fields are freely programmable using the software supplied with the device. This allows each laser scanner to be set up according to the unique requirements of each installation.
Features and Benefits:
• Simultaneous monitoring of 2 protection fields possible
• Modular concept allowing for expanding the systems
• Easy to install and easy to service
• Certified for vertical use for access control or entry/exit applications, as well as hand protection
• The selectable resolution makes it possible to adapt the devices
to a very wide range of application requirements
• Formation of host/guest system
• Plug and play for device exchange (program memory in connection plug)
• Short response time (60ms minimum)
• 190° Scanning window
• 4 m radius for the safety field
• 49 m warning field
• 2 OSSD safety outputs, 1 warning field output, 1 diagnostic output
• 2 Control inputs, 1 reset input, 1 EDM input
• IP 65 approved
Typical applications:
• Production lines,
• Machining centres,
• Entry/Exit stations,
• Robot Cells,
• Freely moving vehicles,
• Narrow corridor vehicles,
• Tube bending machines,
• Automotive Industry
• Area protection
Approvals & Certification:
• Laser Protection class: 1 (21 CFR 1040.10 and 1040.11, DIN EN 60825:2001)
• IP Rating: IP 65 (EN 60529)
• Protection class: 2 (DIN VDE 0160, DIN EN 50178)
• Type: Type 3 (IEC/EN 61496-3)
• Safety Integrity Level: SIL2 (IEC/EN 61508)
SICK S3000 accessories (available separately):
• The connection cable - 271-495
• A programming cable which connects S3000 to a PC via a serial interface for configuration - 271-580
• UE10 Interface relay - 271-502
Note:
Installation and operation of this safety device must be in strict accordance with accompanying operating instruction.
Laser Scanner
Warning
The manufacturer notifies that article: 271-568 (S30A-4011CA / 1028935) is being phased out. The closest replacement article is: 287-7936 (MICS3-CCAZ40AN1P01 / 1133818). Please refer to the Migration Guide document for full details.
